Eusociality Tookit instuctions with ANT Sport+

1.after downloading -> extract the files in the labview
userlib folder
2.open the lib -> maybe labview tells you, that some file could not be 
found.but thats ok -> it will search them automaticly.
3. open the control center (thats a reference app for using the tools)
4. configure the channel options -> in my case its an suunto hr belt
(dont worry - that only crap data is shown
thats because i dont know the correct device type and so on...
maybe i will try a standard ant+ hr belt - that should work
infos can be found here
http://www.semiconductorstore.com/pdf/NewSite/nordic/WP_ANT_AN02_Device_Pairing.pdf)
5. make sure u use the right network key!!!
(i cant tell you that - contact ant for details)
6. 000 are wildcards - every device will be searched (i have messed that up here a bit -
the message freq. should be at 5 hz not 4... so the data looks a bit choppy)
7. make sure u got the right rf frequency
8. start meassuring
9. you will have to adapt the eventstructur to process the data the way
you want.

good luck :)

questions??? - martin.boecskoer@univie.ac.at