Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #17: Sat Nov 15 21:58:25 CET 2003 le@korben:/usr/obj/usr/src/sys/KORBEN Preloaded elf kernel "/boot/kernel/kernel" at 0xc08bc000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc08bc26c. Preloaded acpi_dsdt "/boot/DSDT.aml" at 0xc08bc2bc. Preloaded elf module "/boot/kernel/ng_ubt.ko" at 0xc08bc300. Preloaded elf module "/boot/kernel/netgraph.ko" at 0xc08bc3ac. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1300MHz (598.06-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x695 Stepping = 5 Features=0xa7e9f9bf real memory = 536215552 (511 MB) avail memory = 511180800 (487 MB) Pentium Pro MTRR support enabled ACPI: DSDT was overridden. ACPI-0375: *** Info: Table [DSDT] replaced by host OS acpi0: on motherboard acpi_ec0: port 0x66,0x62 on acpi0 pcibios: BIOS version 2.10 Using $PIR table, 15 entries at 0xc00fdea0 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: port 0x530-0x537 on acpi0 acpi_cpu0: C2 state 1 lat acpi_cpu0: C3 state 85 lat acpi_cpu0: C3 state 185 lat acpi_tz0: port 0x530-0x537 on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib0: slot 29 INTA is routed to irq 11 pcib0: slot 29 INTB is routed to irq 11 pcib0: slot 29 INTC is routed to irq 11 pcib0: slot 29 INTD is routed to irq 11 pcib0: slot 31 INTB is routed to irq 5 pcib0: slot 31 INTB is routed to irq 5 pcib0: slot 31 INTB is routed to irq 5 agp0: mem 0xd0000000-0xdfffffff at device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pcib1: slot 0 INTA is routed to irq 11 pci1: at device 0.0 (no driver attached) uhci0: port 0x1800-0x181f irq 11 at device 29.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x1820-0x183f irq 11 at device 29.1 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x1840-0x185f irq 11 at device 29.2 on pci0 usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: mem 0xc0000000-0xc00003ff irq 11 at device 29.7 on pci0 ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: on ehci0 usb3: USB revision 2.0 uhub3: (0x8086) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered pcib2: at device 30.0 on pci0 pci2: on pcib2 pcib2: slot 0 INTA is routed to irq 11 pcib2: slot 0 INTB is routed to irq 5 pcib2: slot 2 INTA is routed to irq 11 pcib2: slot 8 INTA is routed to irq 11 cbb0: mem 0xb0000000-0xb0000fff irq 11 at device 0.0 on pci2 start (b0000000) < sc->membase (c0200000) start (b0000000) < sc->pmembase (e8000000) cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb1: mem 0xb1000000-0xb1000fff irq 5 at device 0.1 on pci2 start (b1000000) < sc->membase (c0200000) start (b1000000) < sc->pmembase (e8000000) cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] pci2: at device 2.0 (no driver attached) fxp0: port 0x8000-0x803f mem 0xc0201000-0xc0201fff irq 11 at device 8.0 on pci2 fxp0: Ethernet address 00:0d:60:38:76:78 miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1860-0x186f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: at device 31.3 (no driver attached) pcm0: port 0x18c0-0x18ff,0x1c00-0x1cff mem 0xc0000800-0xc00008ff,0xc0000c00-0xc0000dff irq 5 at device 31.5 on pci0 pcm0: pci0: at device 31.6 (no driver attached) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: flags 0x2000 irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled acpi_ec0: Changing GLK from 1 to 0 acpi_cmbat0: on acpi0 acpi_cmbat1: on acpi0 acpi_acad0: on acpi0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled npx0: [FAST] npx0: on motherboard npx0: INT 16 interface orm0: